Durr CAS 1 Amalgam Separator

Combi-Separator - a separating system with integrated amalgam separator

Durr CAS 1 Amalgam Separator


Small, compact, quiet and easy to install, the CAS 1 Combi-Separator combines air-water separation and amalgam separation. The two-stage system with a cyclone separator and dynamic separation turbine achieves a much higher separation capacity than conventional technology. The amalgam separator is on the same shaft as the air-water separator but not directly connected to it, thus saving the use of a spittoon valve. The ISO standards define the minimum European requirments for amalgam separators. In Germany this is regulated by the extensive construction and test principles of the German Institute for Structural Engineering (DIBT) Berlin. The amalgam centrifuge of the CAS 1 meets these conditions with its proven separation rate of almost 98%. Connecting an additional rinsing unit to the CAS 1 can also prevent deposits and coagulation of blood. Apart from extending the components' service life this also significantly improves the hygienic condition of the overall suction system.

  • Two functions in a compact form
  • Cushioned hose connections ensure low-noise, vibration-free operation
  • Amalgam centrifuge is self-cleaning
  • High foam tolerance
  • Amalgam separation rate of 97.9%, test no. Z 64.1-20 from the DIBT, Berlin
  • Fully integrated display module
  • No spittoon valve required
  • Position selection valve can be flexibly installed
  • Voltage (V): 24
  • Frequency (Hz): 50 - 60
  • Electrical power (W): 60
  • Current consumption (A): 4.0
  • Max. rate of fluid flow (1/min): 4
  • Dimensions (H x W x D, cm) without housing: 25.5 x 15, 1 x 11
  • Dimensions (H x W x D, cm) with housing: 43.5 x 25.5 x 16
  • Weight without housing (kg): 2.7
  • Weight with housing (kg): 8.7
  • Separation rate (%)³: 97.9

Equipment Filter

For more information regarding this product...

Get in touch