Ancar 'Touch Expert' Control Panel

Control Panel with Touch Expert Technology for Ancar Dental Chairs


Ancar 'Touch Expert' Control Panel
  • SKUSeries 3 & Series 5. Series 7 Electronic Treatment Centres only.
  • CategoryChair Packages
  • ManufacturerAncar

Description

  • Electronic Instrument Unit controlled by microprocessor
  • The equipment performs an automatic self-test when turned on "Check Control"
  • Instrument programming via digital support
  • Programming of the speed of micro motor, ultrasonic scaler strength and intensity of light to the instruments
  • Selection of two micro-motor speed ranges from 0 to 4.000 (Selective) and from 0 to 40.000 (Global)
  • Display with real working speed of the micro-motor from 800 to 40.000 rpm
  • Programming of the speed ranges from 0 to 4.000 (Selective) and from 0 to 40.000 (Global)
  • Display with real working speed of the micro-motor from 800 to 40.000 rpm
  • Programming of ultrasonic scaler in work mode: scaling, perio and endo
  • Graphic display of the ultrasonic strength Level and the real working speed of the turbine
  • System for the detection and monitoring of visualisation warnings on the display
  • Possibility of having turbine and the micro motor change places using a single compatible hose
  • Pre-installation of lamp self-activation on leaving the idle position and return to cuspidor
  • Separate regulation of the spray and water wealth for every instrument
  • On/off switch of water and air supply into the unit
  • Choice of working language
  • "Update device" system: it incorporates the last updates of programming even some years after its acquisition

about ancar

Equipment Filter

For more information regarding this product...

Get in touch